CONDITION: BRAND NEW IN BOX. Using the dedicated Yamaha LAN Monitor software allows quick troubleshooting; you can check the PoE power supply status, turn the PoE power supply on or off, and use the snapshot function to inform you whether a fault has occurred by detecting any difference in the state of the network since it was set up. You can take a snapshot of the network status when set up as required. The software can then automatically keep track of settings and alert you to any changes. For example, you could take a snapshot of the network, and be alerted if a cable is disconnected, if a device is turned off, or if a wrong connection is made prior to the performance. Enhanced Device ID with Icons, Labels, and Comments. Identifying devices connected to a switch by only their IP or MAC address can be difficult and prone to errors. Connected Dante devices are identified by a Dante icon as well as a device ID previously set up via the Dante Controller software. You can also enter additional info, such as the location of the device, in the Label and Comment fields. Augmenting the VLAN functionality included in the SWR2311P-10G is a built-in RADIUS server function. By setting up one switch as a RADIUS server and linking other switches to it, unauthorized network access can be effectively blocked for enhanced security, even in complex large-scale installations. Device authentication can be set up quickly and easily via a web-based GUI. The SWR2311P-10G supports the LAN Map Light visualization function by WebGUI. Switch settings can be made on graphical screens, not by command entry. With Yamaha’s proprietary L2MS communication protocol, you can check the IP addresses of Yamaha network devices and the network devices connected to them. It can be used widely from system design to maintenance. A microSD card can be used for backing up accumulated data in addition to activating and updating firmware.