Dell Networking N2048P 48x 1GbE RJ45 PoE+ + 2x 10Gb SFP+ Port L3 Switch WYWXP. In Good Condition, Full Working Order. Dell Networking N2000 is a series of energy-efficient and cost-effective 1GbE switches designed for modernizing and scaling network infrastructure. N2000 switches utilize a comprehensive enterprise-class Layer 2+ feature set, deliver consistent, simplified management and offer high-availability device and network design. The N2000 switch series offers a power-efficient Gigabit Ethernet (GbE) network-access switching solution with integrated 10GbE uplinks. The N2000 switch series has high-performance capabilities and wire-speed performance, utilizing a non-blocking architecture to easily handle unexpected traffic loads. The switches offer simple management and scalability via an 84Gbps (full-duplex) highavailability stacking architecture that allows management of up to 12 switches from a single IP address. An integrated 80PLUS-certified power supply and features such as Energy-Efficient Ethernet and short cable detection provide energy efficiency to help decrease power and cooling costs. 2 rear stacking ports (21Gbps) supporting up to 84Gbps (full-duplex). 2 integrated front 10GbE SFP+ dedicated ports. USB (Type A) port for configuration via USB flash drive. Auto-negotiation for speed and flow control. Auto MDI/MDIX, port mirroring. Energy-Efficient Ethernet per port settings. Redundant variable speed fans. Air flow: I/O to power supply. Integrated power supply: 100W AC (N2024, N2048), 1,000W AC (N2024P, N2048P). RJ45 console port with RS232 signaling (RJ-45 to female DB-9 connector cable included). Dual firmware images on-board. Size (1RU): 1.7 in x 17.3 in x 10.1 in (43.5 mm x 440.0 mm x 257.0 mm) (H x W x D) (N2024 and N2048). 1.7 in x 17.3 in x 15.2 in (43.5 mm x 440.0 mm x 387.0 mm) (H x W x D) (N2024P and N2048P). Approximate weight: 8.1351lbs/3.69kg (N2024), 14.0435lbs/6.37kg (N2024P), 8.9287lbs/4.05kg (N2048), 14.9914lbs/6.8kg (N2048P). Rack mounting kit with 2 mounting brackets, bolts and cage nuts. Power supply efficiency: 80% or better in all operating modes. Thermal output (BTU/hr): 117.44 (N2024), 3,113.33 (N2024P), 167.7 (N2048), 6069.80 (N2048P). Power consumption max (watts): 42.9 (N2024), 913 (N2024P), 53.9 (N2048), 1738 (N2048P). Operating temperature: 32° to 113°F (0° to 45°C). Storage temperature: -40° to 149°F (-40° to 65°C). Storage relative humidity: 85%. MAC addresses: 8K (16K theoretical). Static routes: 256 (IPv4)/128 (IPv6). Dynamic routes: 256 (IPv4). Switch fabric capacity: 172Gbps (N2024 and N2024P) (full duplex) 220Gbps (N2048 and N2048P). Forwarding rate: 128Mpps (N2024 and N2024P) 164Mpps (N2048 and N2048P). Link aggregation: 128 LAG groups, 144 dynamic ports per stack, 8 member ports per LAG. Priority queues per port: 8. Line-rate Layer 2 switching: All (non-blocking). Line-rate Layer 3 routing: All (non-blocking). Packet buffer memory: 4MB. RIP routing interfaces: 256. VLAN routing interfaces: 256. VLANs supported: 4,094. ARP entries: 1,024. Access control lists (ACL): Supported. MAC and IP-based ACLs: Supported. Max number of ACLs: 100. Max ACL rules system-wide: 2,048. Max rules per ACL: 1,023. Max ACL rules per interface (IPv4): 1,024 (ingress), 512 (egress). Max ACL rules per interface (IPv6): 512 (ingress), 256 (egress). Max VLAN interfaces with ACLs applied: 24. Dell ISDP (inter-operates with devices running CDP). 802.1D Bridging, Spanning Tree. 802.1p Ethernet Priority (User Provisioning and Mapping). Dell Adjustable WRR and Strict Queue Scheduling. 802.1Q VLAN Tagging, Double VLAN Tagging, GVRP. 802.1S Multiple Spanning Tree (MSTP). 802.1v Protocol-based VLANs. 802.1W Rapid Spanning Tree (RSTP). Dell RSTP-Per VLAN (compatible with Cisco’s RPVST+). Dell Spanning tree optional features: STP root guard, BPDU guard, BPDU filtering. 802.1X Network Access Control, Auto VLAN. 802.2 Logical Link Control. 802.3ab Gigabit Ethernet (1000BASE-T). 802.3ac Frame Extensions for VLAN Tagging. 802.3ad Link Aggregation with LACP. 802.3ae 10 Gigabit Ethernet (10GBASE-X). 802.3AX LAG Load Balancing. Dell Multi-Chassis LAG (MLAG). Dell Policy Based Forwarding. 802.3az Energy Efficient Ethernet (EEE). 802.3u Fast Ethernet (100BASE-TX) on Management Ports. 802.3x Flow Control. 802.3z Gigabit Ethernet (1000BASE-X). MTU 9,216 bytes. RFC compliance and additional features. General Internet protocols are supported. General IPv4 protocols are supported. General IPv6 protocols are supported. 2082 RIP-2 MD5 Auth. 1724 RIPv2 MIB Extension 2. 2365 Admin scoped IP Mcast 4541. IGMP v1/v2/v3 Snooping and Querier. IEEE 802.1ag draft 8.1 – Connectivity Fault Management. Burned In MAC Address…………. 1.3.6.1.4.1.674.10895.3056.———- ———– ————-. 6.3.3.9. System Description: Dell Networking Switch. System Up Time: 0 days, 00h:04m:05s. Burned In MAC Address: 684F. System Object ID: 1.3.6.1.4.1.674.10895.3056. System Model ID: N2048P. Machine Type: Dell Networking N2048P. 04/18/2023 20:52:36. USB Port Power Status. ——— ——— ————- ————- ————. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK. This item is in the category “Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches”. The seller is “itinstock” and is located in this country: GB. This item can be shipped worldwide.

• Ethernet Technology: Gigabit Ethernet (1000-Mbit/s)
• Maximum LAN Data Rate: 1000 Mbps/1 Gbps
• Network Connectivity: Wired-Ethernet (RJ-45)
• Network Management Type: Fully Managed
• MPN: N2048P, Networking N2048P, Dell Networking N2048P, WYWXP
• Layer: 3
• Brand: Dell
• Form Factor: Rack Mountable 1U
• Type: Ethernet Switch
• Maximum Data Transfer Rate: 10 Gbps
• Model: N2048P
• Number of LAN Ports: 48
• Interface: Ethernet (RJ-45)
• Product Line: Dell Networking